Tractor LTZ 60 volumes of refueling liquids. Specifications. Operating experience, advantages and disadvantages

Signs of pregnancy after embryo implantation

The tractor LTZ-60 is an all-wheel drive agricultural machine, the traction class of which is 1.4 tons. This device, which is no longer available today, is effectively used during spring sowing and for harvesting, plowing fields, transporting various goods, and landscaping works.

Tractor LTZ-60

The release of the Lipetsk tractor was launched in 1991. It was decided to improve the previous model - the T-40, which is outdated and definitely needed some work. The result was a fairly easy and inexpensive machine, very economical fuel consumption, stable on the go and easy to manage. She could even contend with the most popular tractor model of the time - MTZ-80.

You now have a few hours on the counter, took a hand with your car and collapsed under this beautiful “rainy sun”. Do I need to support my lawn mower every year? Do not panic, we look at it a little closer, to anticipate all the minor inconveniences of failures of the lawn mower, and you avoid seeing the growth of grass without being able to act.

Interview do now

Using the elevator, you can access the cutting deck and blades. Thanks to this tool, you can access to your side to clean the lower part of the cutting deck with a stream of water when the grass is fresh or with a special tool. This case is often too dirty, reduces its effectiveness, and sometimes its power. Also at this point, you should enjoy watching the state of your blades.

Designers have provided a full reverse on any of the gears, resulting in increased maneuverability. And the fact that the front axle (which is the lead) has been placed on automatics eliminated the slipping of the rear wheels. Bonnet body type allows easy access to the engine for its maintenance. The large cabin with noise and vibration protection is equipped with heating and ventilation systems, and the driver can adjust the comfortable seat to his weight and height.

After cleaning the bottom of the cutting deck, nothing prevents you from washing the water from above. After drying, it may be useful to spray a water-repellent lubricant inside and outside the case to prevent corrosion and limit chipping. Mowers are particularly prone to pollution. Blades of grass, dust and mowers will remain in the hand of mechanisms and ultimately prevent the passage of the machine and prevent the correct setting of the cutting height. It is strongly recommended to clean the mowing after each session.

To do this, you can use a stream of water to remove agglomerated particles. Do not use a grease that fixes dust and forms a kind of rubbing paste that can damage the wheels. Remember to check their pressure as under-stressed tires will increase fuel consumption and reduce mower efficiency.

The ability to connect with various agricultural machinery and equipment (more than 120 species, all those that are compatible with MTZ-80) allowed the use of the tractor for any rural work, and not only. At the time of production, several modifications of the tractor were developed, increasing the possibilities of its use. After the bankruptcy of the plant in 2004 and its reorganization, this model ceased to be produced.
Photos of tractor LTZ-60

Of course, nothing prevents you from raising the hood from time to time to first remove the dirt applied to the engine. Then you can easily remove the air filter to clean it, check the engine oil level and drain it if necessary. The candle can be cleaned or even modified if necessary, and it is easy with a spark plug.

Here are some buying tips to maintain your car several times a year without turning to professionals. Rise: from 60 to 200 euros, beware of used materials and instrument reliability. You will find it with worms, feet or hydraulic system.


Device

Engine

The four-cylinder diesel engine of Rybinsk production, which stands on the base model, is water-cooled. Its capacity is 60 horsepower, and it “eats” quite a bit of fuel - only 8.98 liters in one hour.

Transmission

The unit has a dry friction permanently closed single-disk clutch. An additional clutch is used to transmit the rotation to the power take-off shaft. The four-way gearbox is designed for eight speeds. Its shafts are located transversely. The gear lock is carried out by means of a clutch pedal blocking roller. Brakes - dry, tape type.

A pair of gloves: from 10 to 50 euros, required for processing tools and materials. Water hose with a gun: from 20 to 80 euros, different diameters and variable length, you decide what is best for you. Fluid: engine oil, grease, lubricant and grease, ask before purchasing these products, varying according to your lawn mower.

Interview with a professional

And, of course, many other tools are available, feel free to ask a professional about motor culture, how to equip a garden. Everyone has their own ability to maintain their own equipment. Fortunately, there are pluses! Pro will allow you to explode and not worry about it. At your service and on request, he can pick up his horse car at home or even do it on site thanks to the master trucks!

The main transmission of the rear axle is gear (spur gears). This bridge is equipped with a self-locking dual-satellite differential. On the front axle the main gear is carried out using bevel helical gears, and its differential is a double-sided ratchet double-sided freewheel clutch. If the wheels slip more than 4%, it turns on itself.

He also has the advantage that he knows his job by following regular training on all types of equipment, knowing what is wrong, and reacting very quickly. From simple sharpening blades to wintering, there are various, implemented by professionals, when you trust your car to them.

Suspension system and transmission

Packages from 5135 rubles to 12935 rubles: they perform several complete tasks in order to prepare your car well and give it a second wind. Do not neglect one of your materials, because it is the key to its durability. Annual with the package during the winter allows you to configure and verify that your machine works well and minimize the risks of a breakdown for the next year. It also frees up space in your garage during the intervention of technical experts! Therefore, we used it to please Madame, we removed her garage! 😉.

Electrician

The generator gives 700 watts of power; it is equipped with a 14-volt rectifier and voltage regulator. To start the engine using an electric starter with a capacity of 4 kilowatts.

Used batteries type 6CT-190A. There are two sockets: for connecting a portable lamp and electrical devices for towing equipment. The cabin is equipped with a canopy.

Steering

This mechanism, consisting of a steering wheel, steering column and hydraulic drive, serves to rotate the front wheels. Hydrostatic steering drive with a metering pump mounted on the steering column has an additional hydraulic cylinder in the trapezium. At the steering column, you can change the height (collet clamp) and tilt (there are 5 fixed positions).

Attachment Equipment

The tractor can work with such mechanisms and units as:

  • three-plow plow type PLN-3-35;
  • high-speed cultivator KPS-4;
  • potato planters CH-4B, KSM-4, Mole;
  • beet drills ССТ-12Б;
  • sUPN-8 corn planter;
  • cultivators KRN-5 and KRN-6;
  • pOM-630 sprayer;
  • machine for planting seedlings SKN-6A;
  • potato diggers KTH-2B and VHF-2;
  • kKU-2A potato harvester;
  • foragers FN-1 and FN-4.

And this is not the whole list. Note that LTZ-60 can be easily turned into a car, very useful for public utilities or road builders. For this also used attachments. So, with the help of a plow blade with a shock absorber, it is possible to move the masses of snow or earth away, and by hanging a brush device moving at the expense of the PTO shaft, it is possible to clean the roads. More on the basis of LTZ-60 excavators are manufactured.

Specifications

Technical characteristics of the tractor LTZ-60 in the table:

Specifications Indicators Unit measuring
engine's type D65M1L
Forward speed 1,83-30,03 km / h
Backward speed 5,95 km / h
Traction (maximum) 13,03 kN
Engine power (operational) 44,1 kw
Rotational speed (nominal) 2000 rpm
Torque (maximum) 221,4 Nm
Number of engine cylinders 4 pC.
Bore 11 cm
Piston stroke 13 cm
Working volume 4,94 l
Fuel tank capacity 70 l
Fuel consumption (specific) 242-249 g / kWh
Front track adjustable in steps
Rear track changing wheel rotation
Front gauge size 1,375 and 1,835 m
Longitudinal base 2,145 and 2,12 m
Clearance (adjustable) 0.5 and 0.65 m
Weight (structural with equipment) 2,64 t
Weight (structural without equipment) 2,422 t
Weight (operational, without ballast) 2,9 t
Width (with a gauge of 1,375 m) 1,71 m
Width (with a gauge of 1,835 m) 2,17 m
Cab height (clearance 0.5 m) 2,52 m
Cab height (clearance 0.65 m) 2,665 m
Length (with hinged system) 3,725 m
Length (without hinged system) 3,3 m

Major modifications

LTZ-60A

The model differed in the fact that another diesel engine was installed on it - the D-144, with an air cooling system and an axial fan. This engine was produced in Vladimir, at the tractor factory. Its volume is 4.15 liters, torque - 221.4 Nm, and power is the same as that of the D65M1L - 60 horsepower. The tractor allows you to hang equipment up to 850 kg.

LTZ-60AV

The model has been produced since 1994. It practically does not differ from the base one - it still has the same diesel engine manufactured by Rybinsk.

The LTZ-60AV-01 unit was somewhat different, it had a lowered cabin and was intended for use on farms.

LTZ-60AB

The release of this model began in 1995. It is equipped with a Belarusian-made diesel engine D-248 from the Minsk Motor Plant. Its liquid cooling, power - 57.5 horsepower, displacement - 4.75 l. The motor has a high torque - 235.4 Nm. Load capacity attachments here 900 kg. The most advanced option - LTZ-60AB-10, which is the most popular.

Agricultural universal tractor LTZ-60  It is designed to perform a wide range of work: plowing, cultivating crops, sowing crops, harvesting grasses and cereals, transport works. Traction class tractor - 1.4.

The overall design of the tractor is standard for wheeled tractors of this class and combines the effective use of traction power during the performance of certain works. The weight of the tractor is slightly reduced compared to similar tractors. Engineers carried out work to optimize the distribution of the weight of nodes on the rear and front axle, in order to reduce fuel consumption and the cost of production. Among the advantages of the LTZ-60 AB tractor are light steering, full reverse on all gears, stability and maneuverability. The automatic connection of the front axle has a positive effect on the slip characteristics of the rear drive wheels.

The hermetic cabin of the LTZ-60 tractor has shumovibroisolation, and is also equipped with heating and ventilation systems. A comfortable adjustable seat and a large glass area create excellent viewing conditions for the driver.

The tractor can be equipped with more than 120 tools and machines that can perform almost the entire range of work. LTZ-60 is unified with the majority of units and machines intended for MTZ-80.

Engine

Lipetsk Tractor Plant produces several modifications of the tractor. LTZ-60A is equipped with an air-cooled D-144 engine manufactured by VTZ. At LTZ-60AV a D65M1L engine is installed with water cooling. The diesel engine D-248 produced by MTZ is used as a power unit on LTZ-60AB.

Specifications

Engine D 144: four-stroke, 4-cylinder, air-cooled, with an axial fan D-248, four-stroke, 4-cylinder, with water cooling
Engine crankshaft speed, rpm 2000 2000
Effective power, kW (hp) 44,1 (60) 42,3 (57,5)
Longitudinal base, mm 2 250 2 280
Overall dimensions, mm
  - length 3920 3950
  - width 1710 and 2170 1710 and 2170
  - height (to the top of the cabin) 2560 2560
Track width, mm
  - on the front wheels 1460 - 1790 1460 - 1790
  - on the rear wheels 1375 - 1835 1375 - 1835
Number of gears (Reverse on all gears)
  - forward 7 7
  - in reverse 7 7
Speed ​​range, km / h 3,42 - 30,03 3,42 - 30,03
Power take-off shaft (PTO)
  - independent rpm 540 540
  - synchronous, about / m ways 3,6 3,6
Agrotechnical clearance 540 540
Front axle Leading Leading
Steering Hydrostatic with hydraulic cylinder in trapezium
Load capacity of the hinged system, kg 850 900
Single cabin Sealed, shumovibroizolirovannaya, with a ventilation system and heating, with a large glass surface, comfortable, adjustable seat height and weight of the driver

Clutch

The clutch is installed on the flywheel of the engine and consists of a PTO clutch and a main clutch (dual). In the rear of the clutch basket are the mechanisms of the side and rear PTO and drive. The side and rear power shafts can be used with both synchronous and independent drive. PTO shanks are standard sizes.

Steering

Hydraulic steering consists of a hydraulic cylinder integrated in the steering linkage and a metering pump located in the steering column. The hydraulic cylinder is mounted on the front axle housing.

Fuel consumption

Related publications