Roses from paper with their hands pattern patterns. How to make a rose of paper: do it yourself flower

Now we will tell how to make a big and very beautiful rose. Such a magnificent rose is perfect for romantic and gentle photo sessions. This rose can serve as an unusual entourage for different events from the birthday before the wedding. The most important thing is that a similar rose will not make much difficulty.

For our master class to create a large rose of corrugated paper you will need the following materials (the material is specified on one rose):

• roll of color adhesive tape (you can also use a teip-tape or corrugated paper, isolent, paper construction tape, the latter then it will be necessary to paint in green)
• double-sided corrugated paper (paper color will determine the color of the bud)
• green paper for leaves (green);
• wire
• pencil or pen
• pistol glue for needlework (one rod);
• templates, pre-prepared from white paper for the manufacture: Five small petals in the form of a droplet; fifteen big petals in the form of a heart; Three for a leaflet on the stem; One petal harmonica for a cup of cholestic.

When you prepared all the materials, go to the instructions for creating a large rose.

How to make a big rose of paper.

1. We take template blanks, color corrugated paper and cut the petals and leaves (cut out so that the paper stripes are vertically):

- five small petals in the form of a droplet;

- Fifteen big lobes in the form of a heart.

Now we take green corrugated paper and cut out:

- three for a leaflet on the stem;

- One petal of harmonica for a sewer.

2. We will proceed to the formation of rose petals.

3. We take both hands every petal in turn and stretch from the center to the sides.

4. Let's start with the petals in the form of droplets, take a pencil or handle and unscrewing, giving a slightly curved to each petal for roses bud.

5. Now we take the cord petals and twist the top of their edges with a pencil, from the beginning right, then the left.

6. Your petals should look like in the picture.

7. Next, we will deal with the preparation of the stems. We take the wire and the roll of colored adhesive tape (you can also use a teip-tape or corrugated paper, green isolate, paper construction tape, the latter then it will be necessary to paint green). Swim from the beginning and to the end of the stem, well pressing to the wire with their own hands corrugated paper or ribbon.

8. There should be a stem, as in the picture.

9. Go to the creation of bud, namely the inner part of the rose. We take the first petal in the form of a droplet and attach with the help of a tape or tape tape the tip to the stalk (to the wire).

10. So, with each petal in the form of a drop - in turn fixing to the stalk.

11. You made an inner rose.

12. Once again, do your own hands thoroughly and secure the lower part of the petals.

13. Now we dissolve the external rose petals. To do this, we will need petals in the form of hearts.

14. Wrap each petal-hearter around the inner part of the rose with a small indentation from each other.

15. Gently straighten and carefully fix the colored adhesive ribbon each petal.

16. When they attached all the petals - once again wrap the base of the bud of the rose of teip-flying or tape.

17. Halfped Made - Bud is ready.

18. Rose now should look like in the picture.

19. Now take from the billets of the petal of the harmonica for a cup and wrap the base of the bud.

20. From above, a chashelistic wrap and fix the teip-flying or adhesive colored ribbon.

21. Now we take three sheets from the blanks on the stem from green corrugated paper, three wires and fix it to each wire in turns of the leaflet. This can be done using an adhesive gun, or ordinary PVA glue.

22. We fold in half (the middle is a wire) and stroke the place of gluing with your own hands.

23. We straighten a piece of leaf, should work out like in the picture.

24. Now on the basis of the petal we apply a little glue.

25. Watching the wire (with the paper that you used initially for the stem), starting from the base of the leaflet where glue was glued.

26. On the other end of the wire during the winding we apply a little glue and turn the tip (you can use bilateral tape).

27. Now we take all three blanks with leaves and evenly distribute around the stel. Fix the teip-ribbon or colored adhesive tape to the stalk.

28. Next, starting from the base of the bud and moving uniformly to the end of the stem, wind up once again corrugated green paper.

29. It is well stroked with your own paper with your own hands, especially pay attention to the grounds where branches with leaves are fixed so that the rose looks harmoniously, it is necessary to make a thorough, but the neat winding of this moment. Fix the ends of the paper, as they did in paragraph number 26.

30. Congratulations! Your gorgeous big rose is ready!

31. Approximately this size for the ratio to you should turn out.

32. Perfect and effectively will look if you make a bouquet of an odd number of big roses!

If at some stage you have difficulty, be sure to write in the comments, we will help you with pleasure.

Elizabeth Rumyantsev

For diligence and art there is nothing impracticable.

Content

I can surprise the girl, friends or guests with the help of crafts from paper. Paper flowers will decorate any gift or feast. Choose your option from those offered here.

Paper crafts are affordable and exciting occupation. Paper imitation sometimes reminds natural things, just amazing. For example, some people know how to make a rose from paper, but not everyone may create it as much as possible on a living rose.

Paper rosettes can be mastered on their own, attract children or even to do this in the circle of friends. Such will certainly appreciate the surrounding women. The instructions below will help you embody the conceived.

How to make a roset of colored paper

This method is very simple. You will need only paper suitable color, scissors stationery and glue. You can show fantasy and paint the most ordinary white sheet with paints, wovers and so on so that in the end it turned out really unique decoration.

Draw on a sheet of paper a square with a side of 10 cm. Inside the square from hand, draw a spiral. Scissors carefully cut the spiral to get a strip of uniform width. Start turning the rose, ranging from the outer end of the spiral. In the process of twisting, glipe the cookers to each other at the base of the rose, trying to twist the flower as much as possible. Ready rose can be supplemented by leaves of another color. As a stem for roses, use any wand or twig.

Here is another option how to make a roset of paper.

How to make a rose from a napkin

To decorate a festive table or surprise friends at a table cafe, if. You will only need a napkin and your own hands. Recommendation: The napkin must be single-layer and suitable color, the best pink.

Along one edge of the napkin, remove the strip of a width of about 5 cm and take it with two fingers, clinging the napkin between them. Carefully turn the napkin around the fingers throughout the remaining width to get a tube. Approximately one third of the height of the tube from the top Start it to twist it, forming a dense stalk. Twisting the skeleton is about half of its length, remove the bottom edge of the napkin. It will be a leaf. Continue twist the skeleton to the very end.

Tip: So that the rosette is not spinning, give her strength with the help of an ordinary hair lacquer.

Satin rose rose

There are different ways to manufacture satin roses. Consider the easiest. You can use a needle with a thread in tape tape, scissors and tape itself. Narrow tape for one flower will require no more than meter, and wide (6 cm) - more, about one and a half meters.

Start work from one edge of the tape. The end must be bent at an angle of 45 degrees, and secure thread. Along one of the sides of the tape, perform stitches along its entire length. I pull in the end of the thread, slightly suggest the tape. Wrap it around the curved tip, forming the petals. To give the flower strength, make through stitches through the entire flower. Tip of the tape at the end of the work hide at the base of the flower.

Corrugated Rosa

Corrugated paper allows you to create roses, very similar to real living flowers. There are several popular techniques for performing roses. Choosing a way, you should focus on the presence of free time and the available materials.

For a single flower will need:

• Corrugated sheets of two colors - for petals and for leaves.
• The base for the stalk - wand, twig, wire.
• Glue or tape.

Cut the petals. Each corrugated petal can be cut separately, and you can use a simpler way: folded paper in 4 or 8 layers and cut the petals in advance drawn contour. The tip of each petal twist as close as possible, giving the petal volume. Around the base of the stalk winding the strip of green, after which they attach sheets to it. All the resulting petals are secure to the top end of the stem. It is possible to mount with the help of glue if a small flower, or with a suitable color insulating tape, if the rose is large. Some sequins or beads glued to the edge of petals will give the flower a very elegant and festive look.

Having chosen a specific way, and practicing beautiful decorations with your own hands. Paper flower will decorate a festive table, interior, dress, a hat, handmade card and so on.

Learning to make very beautiful roses from corrugated paper will help the master class:

Found in the text error? Highlight it, press Ctrl + Enter and we will fix everything!

The queen of flowers has always attracted attention, was a welcome gift and decoration. Poems and legends are fame about it, chic bouquets make up of it.

Many needlewomen are interested in how to make roses from paper with their own hands. To create this flower, you will need more time and skills than in the manufacture of simple plants.

Consider several options for making an amazing flower.

Gorgeous bouquet as a gift

On the cardboard, we draw a pencil in the form of a spiral. Then take the scissors and cut the pattern. As a result, the spring should turn out. The pattern is used to obtain billets from color material.

It is necessary to prepare a wire for the flower pad in advance. A little glue is applied to the edge of the future stem. The desired number of buds is done, and then the bouquet is made.

Exquisite flower

The square of the selected shade is folded in half diagonally. Then the petal is cut from the resulting triangle. Deploying it, the master will see that it turned out a whin with 8 petals.

4 blanks should be made. Each item must be modified, cutting 1, 2, 3 and 4 petals, respectively. The whites are glued so that the extreme elements be fastened with each other.

As a result, parts from 2, 4, 5 and 6 petals will be obtained. With the help of a pencil, the edge of each of them is a little rejuvenated. Then the bud is going. Fields cut out of the green material and glued to the bud.

Corrugated paper rose

Original decoration will decorate the interior of any home. Interesting photos of roses from paper will allow you to find your own option to create excellent compositions.

For the corrugated version, you will need green and red material, ribbon for stem, wire, scissors.

Five elements are cut in the form of droplets and 15 parts in the shape of a heart. Billets are neatly stretched around the edges. Bud is formed by alternate gluing petals.

Fixed elements using adhesive tape. Complement the product with green leaves, which are attached to the plants stem.

Now the novice master will be clear how to make a rose from corrugated paper. Based on this product, you can get other options. To do this, simply change the pattern of petals slightly.

Beautiful color paper flower

The sheet is cut into 1 cm strip. The width determines the size of the future souvenir. The region should be bend on the diagonal, twisting the rose.

Bud is fasten with glue in the manufacturing process. Several plants of one or different colors allow creating unique bouquets to decorate the house.

Rose from money

For souvenir you will need printed bills. To get a neat product, you need to follow the step-by-step instructions for the manufacture of roses from paper. The sheet of material is folded in the center and tighten with wire, having previously exposeding angles.

You need to make 4 details, which are then easy to connect to the bud. The wire twists, the resulting plants are formed.

Large Rosa

The following materials will be used in the paper: corrugated paper, wire, tape, glue.

Draw pattern patterns yourself, observed for real plants. You can print the finished patterns, cut them out and transfer to the cardboard.

Rose rose from paper looks unusually at any celebration. If you create several copies, you will get a huge bouquet.

For one product, it will take 15 elements in the shape of a heart and 5 parts in the form of droplets. The obtained petals must be given the desired form. Hearts stretch a bit, and droplets twisted on a pencil.

Two pieces of thick wire are wrapped with a special adhesive tape. Then the bud is formed. The base is located a cup of appear. The leaves are alternately attached to the stalk with a ribbon.

Tsarist Rosa

For a beautiful accessory, you will need napkins of different colors, a tape, a regular pencil. This simple way will create an original gift.

The napkin is wound on the pencil. It must be squeezed. After that, the pencil is pulled out. As a result, six ready-made details should be fastened. Then a whin is formed from 6 petals.

Flowers made of crepe paper

This material is very similar to corrugated paper, but it is softer. As a result, more delicate artificial plants are obtained.

The basis of the manufacture of souvenirs from this material is twisting. This option is ideal for newbies.

It is necessary to take a ribbon with a width of 5 cm and scissors. To fasten the bud, you will need glue. The ribbon is folded, the angles are cut from one edge to get the petal.

Then the process of screwing on a pencil begins, as a result, a whisk is formed. Several blanks can be used for a beautiful craft, gift decoration.

Conclusion

Simple ways of making colors help beginners to master the technique of creating paper colors. This is an amazing hobby that adults and children will appeal.

With the help of different patterns, large and small flowers are obtained, rose rose buds, growth products. They will become an excellent birthday gift or another holiday.

Any event can be decorated with original crafts and bright colors compositions.

Photo of roses from paper with their own hands

According to the legend, roses have not yet had spikes ... such beauty is easily made of paper. The finished flower without spikes, which will not fade and become an original gift for a close man. To origami rose from paper, follow the step-by-step instructions.

Newbies are better to choose an easy way to explore the basics of procedures.

Origami from paper rose for beginners

The process consists of several interconnected stages. The first is to prepare lines (or strips, depending on which scheme). This technique creates a basis for folding. A sheet of paper will need to turn 3-4 times in a special way, following the instructions. The second stage is folding.

What will take:

• paper sheet (office, corrugated, special color);
• origami schemes;
• pencil;
• scissors;
• pVA glue or glue pistol (for fixing);
• scissors;
• wire (if necessary).

Start mastering the manufacture is better with simple schemes so that even a child can independently make a rose from paper - origami. Some techniques allow you to make a cradle without the use of glue and other additional materials.

Twisted paper rose

Take a paper sheet prepared for craft.

Cut the sheet by 2-3 the same long strips. Remember, the width of these strips determines the size of the future flower (the wider, the more rose). Better to do 1-1.5 cm.

Finished strips bend gently diagonally. So from the A4 sheet will be 2-3 (and more) colors.

If you want to additionally make a branch for finished roses, take a separate leaf of green paper (a corrugated or dense color is suitable). Cut the sheet by 2-3 long strips. In the width, let it be 10-15 cm. See that the length of the strips approached the size of the flower. It is desirable 15-20 cm. If the flower turned out to be small - 10-12 cm. Fold and swipe the edge of PVA glue.

Sheets cut separately and glue the finished branch.

Gently stick to the end of the resulting branch of the rose bud. The method is considered simple, it is done quickly.

Origami Rose Simple

Master class on the manufacture of simple roses without schemes. Newbies on the sample suitable for medium stiffness, corrugated, office or colored paper. Cut the excess strip to get a square sheet.

Fold the paper first in half. The resulting rectangle must neatly fold twice.

The top side of the square is discredited by following the direction: to the left and right so that the triangle is in the end. Having finished, turn the workpiece. Fold the other side of the square in a similar way. It turned out a triangle.

Bend the bottom corners of the resulting triangle to fold, following the center line. Instead of one, now two identical small triangles. Open and disappear the crawl - the square will turn out again.

Turn over the workpiece. Both lower sides from the top triangle bend symmetrically, following the direction of the smooth central line.

Bend one top corner by following the direction to the visible central point from the bottom line of the triangle. Pass the parties.

Origami Rosa - Transformer

It turns out not a rose, but a masterpiece. For the manufacture of crafts, there is enough one sheet. Finished rosette is transformed from the bulk cube and back.

Required:

• dense paper 2 colors (for example, pink and green);
• scissors;
• line.

The procedure seems to be a vigorous and complex, but if you follow the instructions in stages, everything will turn out. There is no need to take 2 colors, enough one sheet A4. It is cut into several identical squares (9 × 9 cm). But it is better to take 2 colors, it's easier to make the origami rose.

Fold the square in half. Both halves alternately fold in half so that the folds were on one side.

Right upper corners fold focusing on the first of the folds on the left. Follow.

The right corner below fold too. You can easily deploy the workpiece, then the angle will be top. Two diagonal were added to the three direct folds on paper.

Fold the lower angle to the left aligning the sheet of sheet so that coincided with the right little fold.

Align the upper cut by pressing your finger, and then the resulting open pocket is fixed (see photo).

Turn the detail "upside down". Repeat the manipulation with a slight bottom corner on the left. Just look, there is an angle to impose down the corner made earlier.

Follow the fold, following it with the vertical fold on the right, as already done.

Repeat manipulation to get another fold.

Turn over the workpiece. Carefully generate corners. Cancele the bottom corner on the right and the left top.

As a result, there will be a square with several corners. The remaining sheets (pink) fold too.

Green squares should also be added before the formation of pockets. The step-by-step instruction described above will help. Bend a small corner at the bottom, which is right. The resulting corner right away.

Turn the workpiece to 180 degrees and repeat the steps described above by taking the bottom corner on the left. It turns out the workpiece similar to the pink, only with a wrapped area.

Turn over the workpiece. Bend its top corner looking as it was in a pink, trail downside.

At first it seems that the origami rose is very difficult from paper and long. But in the end you will get a paper cube that will be transformed into a beautiful little flower.

Connect green details. The first (left) Detail hold the little corner to watch up, and the angle is authentic - down. Second (right) Detail Insert a long angle in the Pazic.

Turn the third part and insert a long corner neatly in the groove from the second from the details. Long corner from the first insert into the groove from the third.

Follow the description and follow the drawings. Try to form a triangle-diagonal of three details.

Collect pink. Again, insert the long corners of these parts alternately into open grooves. Look at the slots. It can be seen how the slots are beautifully diverting on the sides from the top.

Connect. Gently insert long corners with pink in open grooves in green. Short corners do not touch. It turns out a small cube sticking short corners. Open green.

It is harder to disclose petals. So that the flower turns out beautiful, act neatly. It seems that the drill is incorrectly assembled. Just the petals are tightly held. If the fingers did not come out, take something sharp.

Beautiful bright paper flowers can be done very easily. We only need to stock the necessary materials and follow step-by-step recommendations. How to make a rose from paper in various ways? Learn from the article.

We offer such facilities for the manufacture of a flower:

Paper rose

Bouquets of such colors look great in a bouquet. The beauty of the rose from paper tape depends on the correct break of the strip and good upper bend. When twisting the upper edge should always be bent into the outdoor side.

For the manufacture of paper roses by twisting paper ribbons, materials will be required:

• colored paper;
• glue;
• long wooden spanchka.

Also need a charged adhesive gun, a ruler, pencil and scissors. Before the start of manufacture on colored paper, a bright color draws two bands with a width of 2.5-3 cm, cut off and glued them from the end of one side.

The process of making roses includes such steps:

• bend the tape at one side at an angle of 100-110 ° so that its part falls below the edge of 2 cm;
• perform one revolution around the resulting triangle, remove the bend;
• take big and index fingers for the protruding tip, lay the bending place;
• call the long edge of the tape out, lock the bend;
• take a triangle tail in my right hand, left to hold the top edge, start winding the rose bud, rotating his right hand;

• when the triangle at the top of the strip is coming to an end, wrap the long edge of the tape outward, remove the edge;
• after 3 turns, lock the tape with a glue gun;
• continue forming a flower similarly along the entire length of paper tape;
• turn over the head, put the glue point to the remaining tail, lock;
• from the adhesive gun, the glue in the center of the bud, put it on the skewer;
• from the green paper cut the flower leaves, bend slightly middle;
• stick green leaves.

The magnitude of the floral head depends on the width of the paper tape. From one sheet of color paper A4 format comes from 3 to 20 roses. The size of the spedes is selected depending on the magnitude of the head.

Corrugated paper rose

Very natural and gently looks like a flower of roses from corrugated paper. For buds choose any colors. Stem and leaves are performed from green.

• corrugated paper;
• glue;
• thick wire, twig for stem;
• thin wire.

Also need scissors, marker, adhesive gun.

The paper flower will look natural and filled if the paper strip will be long. Therefore, we recommend using a complete roll.

The manufacturing process includes such steps:

• for the manufacture of medium buds, measure the roll of 5 cm on one side, swipe the marker, cut off;
• wrap the edge on one side, press;
• make similar bends along the entire length of the tape;
• collect buds: Screw the tape, starting from the edge, compress the bottom edge;

• twist the bottom of the fine wire, lock;
• cut from green paper long stripe and leaves;
• lock the edge of the green ribbon on thick wire or sprig, tight wrap along the entire length so that 5-6 cm tape remains at the end;
• jump the floral bud on the stem, stick out of the adhesive gun;
• tight wrap the residue of the green ribbon the twist of the bud, lock the edge of the adhesive;
• take the sheets, stretch slightly edges;
• stick leaves on the stem.

For the manufacture of small buds, make a tight and shorter. Screw the strip to the desired flower filling, cut and fix the edge.

Make a gorgeous bouquet of fine coated cardboard for even novice masters without experience. Use double-sided cardboard of all colors.

For manufacture, you will need such materials:

• thin double-sided melted color cardboard;
• pencil;
• paper;
• wire;
• bead;
• corrugated paper green.

We also need scissors and a fused adhesive gun.

Do not use tight cardboard - it turns out a rough flower. Rose will be beautiful if you make a bud from the finest cardboard with a thickness of 0.2 mm.

• draw on a sheet of paper, ranging from the center, spiral. Observe the same distance between the turns;
• make a wavy line, cut the template in the wave - it turns out the spring;
• circle the wavy edge on the cardboard, cut out;
• take the wire for the stem, wrap it with a green corrugated paper strip;
• apply a drop of glue from the adhesive gun to the edge of the stem;
• mix the spiral of the workpiece on the stem;
• tighten the petals up, form a bud, fix glue;
• plore the beads to the center of Booton.

Similarly, make the required amount of roses, assemble a bouquet. Select the package to taste, say. Instead of beads, small lollipops also use. In this case, the flower form around candy.

Crepe paper rose

Beautiful roses with separate natural petals are made of crepe paper with fine corrugated pattern. Petals are carried out gentle and natural.

For the manufacture of a flower, materials will be required:

• cretaged paper green and any other color;
• green adhesive tape;
• thick wire, branch.

From the tools only need scissors. Pre-make the pattern of petals in the form of a drop and in the form of a heart. Size optional. The height of the templates must coincide.

The process of manufacturing a flower includes such steps:

• cut 6 petals from attached paper in the form of droplets and 16 heart shape;
• stretch your fingers on the edge of the whole petal;
• wire or branch for the stem wrap in adhesive tape;
• form from the petals-drops of the middle of the bud, each petal lock the ribbon;

• place alternately all the petals in the shape of a heart, when attaching, turn the bud gradually;
• cut out the leaves from the green crepe paper, fix the adhesive tape, cut.

Boutonnieres make flowers, decorate gifts. In such cases, the stem is made short, and the residue is cut. Flower heads form decoration.

Rose of colored napkin

Beautifully decorate the packaging will help a rose from a bright textured napkin. To make a gift make one big bud or make up bouquets of several small.

For manufacture, materials will be required:

• colored napkins;
• durable thread.

Also need stationery scissors and hole punching. The manufacturer includes such steps:

• take two folded quadbies, fold them together;
• roll up diagonally, then again;
• draw around the edge with a pencil rounding, cut more superfluous;
• expand the napkin, position each layer in any order. Do not shift the center;
• fold the napkins twice, make a hole in the center hole;
• throw through the folded twice wipes threads, tie two nodes;
• expand the petals, flush the bud.

A rose made of paper is attached to the package with glue or is attached to a thread behind a zooming tape. Excess thread cuts off.

When forming boutonnieres from semi-walled flower buds, collect a fist, firmly squeeze, the top of the petals slightly twist. Then, relieve the fist, slightly press the bud. Split upper petals, divide the edges of the sheets.

Make a unique paper flower for interior, gift decoration, the creation of a bouquet is just with your own hands. Step-by-step instructions will help even a person without experience make wonderful flowers from ordinary paper.