Flat roses of paper with their own hands. How to make a rose from paper? Easy and quickly make a paper rose with your own hands.

According to the legend, roses have not yet had spikes ... such beauty is easily made of paper. The finished flower without spikes, which will not fade and become an original gift for a close man. To origami rose from paper, follow the step-by-step instructions.

Newbies are better to choose an easy way to explore the basics of procedures.

Origami from paper rose for beginners

The process consists of several interconnected stages. The first is to prepare lines (or strips, depending on which scheme). This technique creates a basis for folding. A sheet of paper will need to turn 3-4 times in a special way, following the instructions. The second stage is folding.

What will take:

• paper sheet (office, corrugated, special color);
• origami schemes;
• pencil;
• scissors;
• pVA glue or glue pistol (for fixing);
• scissors;
• wire (if necessary).

Start mastering the manufacture is better with simple schemes so that even a child can independently make a rose from paper - origami. Some techniques allow you to make a cradle without the use of glue and other additional materials.

Twisted paper rose

Take a paper sheet prepared for craft.

Cut the sheet by 2-3 the same long strips. Remember, the width of these strips determines the size of the future flower (the wider, the more rose). Better to do 1-1.5 cm.

Finished strips bend gently diagonally. So from the A4 sheet will be 2-3 (and more) colors.

If you want to additionally make a branch for finished roses, take a separate leaf of green paper (a corrugated or dense color is suitable). Cut the sheet by 2-3 long strips. In the width, let it be 10-15 cm. See that the length of the strips approached the size of the flower. It is desirable 15-20 cm. If the flower turned out to be small - 10-12 cm. Fold and swipe the edge of PVA glue.

Sheets cut separately and glue the finished branch.

Gently stick to the end of the resulting branch of the rose bud. The method is considered simple, it is done quickly.

Origami Rose Simple

Master class on the manufacture of simple roses without schemes. Newbies on the sample suitable for medium stiffness, corrugated, office or colored paper. Cut the excess strip to get a square sheet.

Fold the paper first in half. The resulting rectangle must neatly fold twice.

The top side of the square is discredited by following the direction: to the left and right so that the triangle is in the end. Having finished, turn the workpiece. Fold the other side of the square in a similar way. It turned out a triangle.

Bend the bottom corners of the resulting triangle to fold, following the center line. Instead of one, now two identical small triangles. Open and disappear the crawl - the square will turn out again.

Turn over the workpiece. Both lower sides from the top triangle bend symmetrically, following the direction of the smooth central line.

Bend one top corner by following the direction to the visible central point from the bottom line of the triangle. Pass the parties.

Origami Rosa - Transformer

It turns out not a rose, but a masterpiece. For the manufacture of crafts, there is enough one sheet. Finished rosette is transformed from the bulk cube and back.

Required:

• dense paper 2 colors (for example, pink and green);
• scissors;
• line.

The procedure seems to be a vigorous and complex, but if you follow the instructions in stages, everything will turn out. There is no need to take 2 colors, enough one sheet A4. It is cut into several identical squares (9 × 9 cm). But it is better to take 2 colors, it's easier to make the origami rose.

Fold the square in half. Both halves alternately fold in half so that the folds were on one side.

Right upper corners fold focusing on the first of the folds on the left. Follow.

The right corner below fold too. You can easily deploy the workpiece, then the angle will be top. Two diagonal were added to the three direct folds on paper.

Fold the lower angle to the left aligning the sheet of sheet so that coincided with the right little fold.

Align the upper cut by pressing your finger, and then the resulting open pocket is fixed (see photo).

Turn the detail "upside down". Repeat the manipulation with a slight bottom corner on the left. Just look, there is an angle to impose down the corner made earlier.

Follow the fold, following it with the vertical fold on the right, as already done.

Repeat manipulation to get another fold.

Turn over the workpiece. Carefully generate corners. Cancele the bottom corner on the right and the left top.

As a result, there will be a square with several corners. The remaining sheets (pink) fold too.

Green squares should also be added before the formation of pockets. The step-by-step instruction described above will help. Bend a small corner at the bottom, which is right. The resulting corner right away.

Turn the workpiece to 180 degrees and repeat the steps described above by taking the bottom corner on the left. It turns out the workpiece similar to the pink, only with a wrapped area.

Turn over the workpiece. Bend its top corner looking as it was in a pink, trail downside.

At first it seems that the origami rose is very difficult from paper and long. But in the end you will get a paper cube that will be transformed into a beautiful little flower.

Connect green details. The first (left) Detail hold the little corner to watch up, and the angle is authentic - down. Second (right) Detail Insert a long angle in the Pazic.

Turn the third part and insert a long corner neatly in the groove from the second from the details. Long corner from the first insert into the groove from the third.

Follow the description and follow the drawings. Try to form a triangle-diagonal of three details.

Collect pink. Again, insert the long corners of these parts alternately into open grooves. Look at the slots. It can be seen how the slots are beautifully diverting on the sides from the top.

Connect. Gently insert long corners with pink in open grooves in green. Short corners do not touch. It turns out a small cube sticking short corners. Open green.

It is harder to disclose petals. So that the flower turns out beautiful, act neatly. It seems that the drill is incorrectly assembled. Just the petals are tightly held. If the fingers did not come out, take something sharp.

Flower bouquets are an elegant ornament, and on attractions homemade can argue with garden. After reviewing the master class, anyone will make a charming rose, and this is a wonderful gift.

Easy method

For the manufacture of roses, it does not take much time, and the pleasure brings not only the result, but the process itself. Flowers can be used as decorative elements adorning the interior of the room.

It is necessary to cook: glue, scissors, an album for drawing, colored paper, besides, find the original vase.

Stages of work:

• Cut from a sheet of paper cut the square with a side of 10 cm, pick up the color gamut to your taste.
• At the workpiece, you will depict a spiral.
• Take the scissors to cut the resulting item in the contours.
• Take your fingers an external end of the spiral and start it to twist it.
• After completing the formation of a bud, fasten the design by taking the end from the inside.
• Cut a green leaf, spread it with glue surface and connect with a bud.
• Fasten the finished flower with a leaflet on the end of the twig.

Gorgeous rose looks great, it must be put in a beautiful vase with the original decor.

Dense paper rose

Before starting work, you need to prepare tape, scissors and tight paper for homemade.

Stages of work:

• List Bend in the middle and fold it twice again.
• Expand the sheet and cut the paper to 4 equal stripes.
• Scotch and cover the ends of the strips with each other so that it turns out a long strip.
• Twist the paper strip, you must result in a rod that will be used to be used as a stem.
• Fold in half the remaining paper, turn it around the generated middle and form the rose bud layer over the layer.
• If white homemade, then you can repaint the finished product in any shade of the iris palette.

Rose from strong paper

Prepare scissors, simple pencil, glue or floral tape, wand, fastener paper.

Stages of work:

Make a template, draw a heart on a sheet of paper, the size of the rose depends on its size, for example: the height of the heart can be 15 cm.

Using the template, cut 5 or 6 hearts with scissors.

For the stem, connect together 3 wires, as an alternative option, take a wooden wand, turn the workpiece using a floral tape, also use glue.

For the manufacture of petals, paper gently pull in the horizontal direction in both directions. Mock the edge of the heart on top, after this petal, wrapping it around the stem, make the ribbon. Repeat the above described actions with all hearts.

The leaflets are cut in advance, then turn the wire with paper and glue the finished leaves.

To make a green cup of roses, use a strip of corrugated paper. It is attached to the flower with a tape or glue, lay the leaves on the stalk and complete the design of the stem.

Homemade rose on template

This time, for the queen of flowers, you will need to make a pattern, scissors, wand, pencil, glue, and a printer.

Stages of work:

• Find the rose pattern on the Internet and download it to your computer.
• Print the template on the printer, cut out petals with leaves from colored paper, an important part - on the template, each item goes under your number.
• Take advantage of scissors and generate your ends of each petal.
• Green leaves bend twice in length.
• Wrap the skeleton with a petal with number 1, lock the paper blank using glue.
• Around the first petal, wrap in turns of the second and third petals, which also need to fasten with glue.
• Rose petals 4-7 will need to glue so that they take the cone-shaped form.
• Collect individual parts of roses and glue them together.
• Coloring Choose on your choice, popular shades are pink, yellow, red and white.

Paper Roses from Colored Cardboard

Prepare for this homemade scissors, glue, simple pencil, color cardboard sheets.

Stages of work:

• Position on paper a helix wavy line coming from the center.
• Scissors cut through the line made to get a strip similar to the apple skin.
• The spiral wrap on a pencil, wake up the opportunity to tight, until you reach the middle. Now remove the pencil, and spread the rose with your fingers.
• In the middle, apply glue, the adhesive composition must drain the center of the spiral, press the homemade.

Look at the photo of roses from paper, a beautiful homemade colors looks simply great, it is impossible to not pay attention to it.

Corrugated rose

Take the following: corrugated paper, glue, scissors, wand.

Stages of work:

Paper fold in length and width several times. Cut the petals in the form of hearts, while one cut allows you to perform all 8 parts.

Petals remember a little between your fingers so that they look as much as possible. Cut the paper strip 3 cm wide, apply glue to its surface.

One end of the tape, put a small wire and wrap the strip on it to get the core of the flower to which the petals are glued. Apply glue on the petals and stick to the central part of the flower.

Take the corrugated paper of the green color and fold it twice in half, cut out the petals, and wrap the green paper strip the stalk, in front of this wire, you should be wrapped in a foam rubber.

Knowing how to make a rose with your own hands, you can originally decorate any celebration, the queen of flowers is attractive in all its manifestations. An unusual flower looks great among jewelry, he is able to give a festive mood to all others.

To make homemade, no special skills are required, so looking at the video instruction, you will easily repeat all the steps in practice.

Stock Foto Roses from paper do it yourself

Rosa is rightfully considered to be the queen of flowers - neither adults or children can not resist her beauty. Therefore, it is often used to decorate crafts and making souvenirs, these colors made from various materials - plasticine, masses for modeling, salt dough and, of course,. If you know how to make a rose from, you can decorate a variety of products with your own hands. Consider a few simple variants of its manufacture.

Paper spiral rose

The first option is so simple that even a child can cope with the task. Everything that will be needed is, a simple pencil, some glue and a CD. The disk will be burned around the circumference on the paper sheet.

The resulting circle is cut along the contour.

A spiral line is carried out from the edge of the circle to the center. Even if it succeeds not particularly smoothly - nothing terrible, rose petals also do not differ from special symmetry.

On the applied sheet lines is cut, turning into a spiral.

This spiral is neatly twisted into the tube.

The edges of the roses are unfolded. We glue it to the disk. A few green leaves are cut out of the green paper and glued to the disk. Ready!

Rose of wave paper spiral

The second option of how to make a rose from colored paper, differs from the first only in that after receiving the helix, a wave-like form is given to one of its edges.

The billet is obtained more lush and openwork.

Otherwise, everything happens in the same scheme as in the first case: the spiral rolls into the tube.

The tube is inserted into the disk hole to which two green leaf are glued. It turns out more accurate, but in its own way very beautiful rosette.

Rose from corrugated paper and wire

To realize another way of how to make a rose paper, you need to stockpite with a corrugated sheet and fine, well-retention, wire.

From the sheet, cut out a long enough and wide band.

Take the wire with a wire, carefully unwind it.

Hound the paper on the wire

We continue to twist the paper.

It remains only to twist it on the helix and even more to fluff up the top edge. The lower part is well twisted and fix a piece of wire, a drop of glue or thread. We have a lush rose head.

From the corrugated sheet, we cut the leaves, glue them to the flower cup.

Such a rose can be decorated with any, and you can use it for the manufacture of a bouquet. Everything that this will need is to attach the stalks to the floral head, which can be made of a skewed stick or a cocktail tube, wrapping them with a green sticky ribbon or a green paper sheet.

Rose on the stem from corrugated paper

Beautiful rose on the stem is obtained from color corrugated paper. To do this, cut two squares from corrugated paper and fold them twice. One of the strips twist.

Twisted strip wrapping the second tape of corrugated paper. Fix paper at the base with threads.

The resulting bud wrap green paper.

Watch paper before receiving a flower stem.

Cut from green paper sheet and glue it to a stalk. The volumetric rose from corrugated paper is ready!

You can make a whole bouquet of roses as a gift!

Applique "Roses" from twisted paper

Rugs can be decorated with a postcard or paper figure - for example, a heart. To do this, need a sheet of paper suitable color, pencil (or simple round wand) and glue.

With a pencil or sticks twist a paper sheet into a roll. Cut it into several rolls of one length.

We stick these small rollers on a paper figure.

We supplement the composition with the same paper "leaves". That's all!

Easy Rose of Paper Rectangles

One of the easiest ways to make roses is to make it from paper rectangles. Cut the rectangles from thin paper and fold them one on another.

The manufacture of artificial colors from paper has long been a favorite needlework of both children and adults. Roses are undoubtedly belong to the most popular colors, and many achieve great mastery in their manufacture, seeking amazing similarities with live flowers, which is easy to see in the photo of roses from paper.

But sometimes paper roses are specifically made stylized: it is suitable for decorating gifts, table setting, room decoration. Someone, on the contrary, wants to achieve greater realism. From this article you will learn how to make with your own hands from paper roses.

What paper can roses from?

The answer is simple - almost from any. The method of manufacturing a flower and a final result will depend on the choice of paper: for example, roses from corrugated paper are more realistic, and color roses are more decorative.

This article will give several step-by-step instructions for making roses from paper, but in fact ways to create paper roses are much more.

Rose from strong paper

Cut the fasten paper of the color you need into several smooth rectangles. Now make a gear tape from them: overlay the rectangles one on the other corners, glueing one with another drip of the glue, you should get a gentle on both sides of the tape.

Now take a small ball from the wool or crumpled paper and start gently wrapping around it with you from your handwriting. You have to get a bud. Similarly, you can make so many rose boutons from a strong paper, how many roses you need.

Make one more toothed tape, but now its edges must be rounded. Gently wrap it around your bud. You should get a lush rose.

Rose spiral method

Draw a wavy lines on a sheet of colored paper. Spiral flower pattern and cut out, following the edge to the center. You must have a paper wavy spring.

On the tip of the wire, harvested under the stem, drip glue and wrap your spring, forming a pink bud. Secure the buzz of the glue below. Rose is ready!

Corrugated paper rose

Many wonder how to make a rose of corrugated paper, since it is such roses very beautiful and similar to real. In fact, make such flowers simply enough.

Fold a few stripes of corrugated paper into wide, smooth ribbons, and secure from both ends (for example, paper clips) so that they do not shift relative to each other.

Cut from folded rose petals of different sizes - large, medium and minor. You will have three packs of petals of different sizes.

Using light-topped paper and glue, make a cocoon ovally mold at one end of the wire. When the cocoon is sufficient, squeeze its bottom glue and begin to glue the petals.

Start with small petals, then go to average and then to large. The tips of the petals are slightly with your fingers, a little flex and delay that the rose looks like a real one.

We place the wire under the stem using green fastener and glue. In this way, it is easy to make a rosy rose from paper.

Rose of colored paper in four tiers

Fold the sheet of paper fourly and then in a triangle (such a method is folded for cutting snowflakes). Cut the semicircular module - when you turn around, you should get a flower with eight petals.

Cut four such flower. From each tier, cut off extra petals (four petals at the flower for the upper tier, three petals - the flower for the second tier, two petals - the flower for the third tier and 1 petal - for the first tier flower). You must have four blanks - with 4, 5th, 6th and 7th petals, respectively.

Now glue flowers in a cup - impose two extreme petals from each workpiece one on the other and glue with glue.

Fold together one to another and start the basis - a circle of cardboard.

Take a wire, form a tiny ball at one end and wrap a ribbon from the same paper on it - it will be a middle of a rose. Count it to the center of the resulting rose, gently pouring the circle of the base from the cardboard. On the same wire can ride leaves cut from green paper.

Photo of roses from paper with their own hands

The rose of paper is good as a sign of attention and element of the interior. The following describes in detail many varieties of production, so everyone will select perfect for themselves.

It is possible to build it from various materials from special floristic crepe sheets and before ordinary napkins that are in each kitchen. Here is an incomplete list of variations.

Rosa origami

In school years, everyone launched airplanes, fused the boats along the creek or played with the cranes, and today we will try to hone the origami skills, collecting the simplest, but very elegant figure. For this, the square sheet is useful for us, do not take a little if you make such a thing for the first time, it is better to take A4 and cut up too much, and then stages to follow the instructions in the picture.

According to this scheme, you can easily make a wonderful flower and surprise your friends an unusual gift.

For a more complex instruction, you can speak a nice rose that can be used as brooches or attach to hair rim.

Flower of cardboard spiral

Another possibility of execution of this pictorial plant is a paper spiral. It is only necessary to repeat everything that is demonstrated in the photo and you will have a minimalistic rose. Probably the easiest way, such a flower can be made even with a child, and if you repeat several times, you will have to re-establish a frame for photographs.

Alay Press Castle

From corrugated paper, you can create two types of crafts, in this article there are both, you can only choose the best.

First method

You just need to cut the rectangles of any shade, round the corners, stretch them with their hands, and then, using thread, fasten around the candy, as shown in the scheme, and you will get a wonderful creation. You can connect several colors into a remarkable unfavorable composition.

Second way

Now replace candy with a long wooden wand.

Cut from crepe paper Detail depicted in the photo and wrap it around the sticks, open the leaves and tear up with a thread. You can make delightful

bouquet and decorate the room, it can be both big and tiny.

How to make a queen of plants from a napkin

To easily and quickly implement an adorable idea, it is necessary to do everything according to the instructions of this detailed master class. As a result, you can get a faithful home decoration from a regular handker. You can serve a festive table such a fierce napkin.

Rose from cigarette paper

To create it, we will need a couple of things.

• Tishye
• Scissors
• Pin
• Round subject
• Wire-Shenil or Plastic Rod

The process of process is quite simple:

1. To begin with, folded paper-sessive 8-10 times and draw a circle on it.
2. Creare and cut a circle.
3. To the center to stick Shenil or plastic pin. Ends adjust.

Remove the clamp and open the bud, you can cut the edges of the leaf marker.

The result is removed by air, weightless and gentle. Such a bouquet will be an unforgettable surprise for mom, sister or girlfriend.

Egg trays appliques

For the manufacture of this simple decoration, you will need only scissors, glue, wire and empty egg packaging. If you perform every action according to our step-by-step instructions, these boutons can make even a baby.

1. Cut from the cell substrate and divide them into fragments. There should be 2 blanks with four petals and two with five.
2. Using the needle, pour small holes in the center.
3. Tie them by riding the wire and bending her tip.
4. Put the shape of the bud with your fingers, spreading it from the middle to the edges.
5. The end of the wire is made in the form of a stem, covering it with green paint.

Ready work can be painted in any color.

Despite the strange material, the result will exceed your expectations, it will remarkably fit into any atmosphere or become part of the flower arrangement.

Queen gardens from paper strip.

The assembly technique of this bud is called quilling. This is the most difficult version, but the result is worth it. To begin with, prepare a color ribbon wide 1-5 centimeters, and then follow the manual in a photo or video. If you managed well, you can try to apply an atlantic ribbon instead of a strip. The result you will like it.

ROST ROSA

The option of the growth craft is perfect for photo shoots or as a scenery for a wedding or birthday.

You need to take a thin color cardboard for petals and bases.

Cut the hexagon and shapes from the cardboard, as in the photo, cover the petals to the base and blind the blank of the core, put it in place and secure. You can cut green leaves. It turns out a luxurious rosette, its size can be any.

Toilet paper

You can create a delightful flower with your own hands, even from such an ordinary thing for everyone. Bend the lane by the "accordion" and start the rope, straighten and glue three or four blanks, make it up to the stalk and admire the fruits of labor. Such a homemade can be painted any paint, and put in a vase with branches or drieds. Very velvet, soft balls.

Rose by template

A good method - bend on a curly graphic pattern. To do this, you can use starchable fabric.

Independently draw a similar spiral wavy pattern, or print stencil, disintegrate over contours. Wrap the figure around the flower maker and shove the end.

Mastery not only fascinating, but also useful. It improves small motility, teaches patience and creativity! Undoubtedly, to do this with children. After reading this text, each will definitely become the owner of a paper rose.