Weaving wreaths on the head of artificial colors. How to weave a wreath of flowers of artificial and field

Are you preparing for the wedding, are you going to hold a party outdoors, or just decided to glad the onset of spring and summer, the creation of a flower wreath will allow you to create an appropriate holiday atmosphere. A wreath of flowers is a fairly simple and attractive way to decorate any event. To make your own unique wreath, acquire your favorite flowers and secure them on a wire base.

Steps

Production of wreath on a wire base

Measure the scum of the head and add 5 cm to measure. If you are going to wear a wreath on top of the hairstyle (for example, wedding), then first work, make a hairstyle, and only then measure the scuffing of the head together with the hairstyle. Some types of hairstyles, for example, ordinary and wicker in a circle, French pigtails can give the head an extra volume.

Cut a piece of durable wire of the corresponding length. Try to take a thicker floristic wire, for example, which has a paper winding. To such a wire will be better adhere to floristic tape. Do not use conventional wire cutting scissors, otherwise you fill them. Take special plugs on metal.

Roll the wire into the ring by imposing its ends to each other by about 2.5 cm. The ring made should be able to keep shape. If it turned out too climbing, then twist 2-3 wires and re-make the ring from them. So it will turn out more durable.

To fix the ends of the wire, see them with floristic scotch. You can also optimize all the ring. This will provide a better basis for further work with a wreath. Also this action you will give the basis of a wreath uniform color.

Choose flowers for a wreath and cut their stems to a length of 2.5-5 cm below the bud. Take the scissors to trim the living or dried colors, and the plumbings for metal for cutting artificial colors. Try to crop all the flowers equally. So the wreath will turn out more homogeneous and tidy.

• Try to use small, medium and large-scale flowers. This will make a wreath more diverse.

1. Place the flowers in the order you like. Until you hurry to fix them to the base of the wreath. First of all, you need to think about the design. Make changes to the design will be easier if the flowers remain freely lying on the table. Try to play with flowers of different shapes, size and painting. The following is a few additional designer ideas.

   • Place the largest flowers in the front of the wreath. Take all the more and smaller flowers as it moves to the back of the wreath.
   • Try to stack all the colors in one direction (by the middle of the transfer or from it).
   • Flowers are not required to place side by side with each other. You can place them so tightly or rarely, as you want.
   • Instead of the distribution of colors throughout the perimeter of a wire base, they can be positioned only in the front of the wreath.

2. Attach the first flower to the wire base. Keep the flower so that its stem was parallelled with a wire base. Take the floristic tape and attach them a flower to the base. Start brushing the flower with a scotch directly below the bud and continue to do it about 1.5 cm after the end of its stem. Cut the scotch and press to the base of the wreath of the remaining tip of the scotch.

   Attach the second wreath flower directly at first and fasten it with floristic scotch. Position the second flower in such a way that its buds overlap the first one. The closer the flowers will be located, the more lush and hard it turns out a wreath. The less the flowers will be located, the less volume, but the wreath will come out more elegant.

   Continue to apply flowers to the base of the wreath and consolidate them with scotch. Work in a circle until you reach those colors from which you started to make a wreath.

   Think about attaching to the ribbon wreath. Fold a few long tape segments in half and attach them to the place where the ends of the wire base are bonded. Lift the bend seat ribbons by about 2.5 cm above the wire base to use it as a loop. Wrap the free ends of the ribbons around the wire and spend in the loop. Carefully pull the ribbons to fix their position.

   Sample the wreath and, if necessary, bring some corrections to it. If you notice a shortage of colors in certain places of a wreath that you want to see more lush, carefully spread the buds there, insert the extra flower and secure the scotch.

   Attach a new flower to the left stalk.

   Both left stems move to the middle between the right and central stems. Keep these stems together, they will be considered a single whole.

   Add a flower to the right stalk. The new flower bud should settle down directly below the buds of already woven colors.

   Both right stems move to the middle between the left and central stems. Do not let the right stems crumble. Try to keep them together and consider them in one whole.

   Continue to repeat the last steps to achieve the required weaving length. As the colors add to the wreath, the flared stalks will become thicker and thicker.

   • Try using a variety of colors for wreath. This will give him more expressive color shades, texture and special beauty.
   • Do not be afraid to add leaves, herbs and letters in a wreath.

3. Stop weaving when it opens a few centimeters longer than the required length. Weaving should be slightly longer, as it will take a small backstage to bonding it ends. So you will be able to secure the wreath.

   Secure the end of weaving with wire. Place the wire directly under the latest weaving buds. Wrap it around the stems several times, and then cut down excess plaques for metal. It will fix the flowers and will not give a wreath.

   Align the ends of weaving. Align the ends of the weaving so that the wreath is comfortable with your head. Hold the ends in the desired position when you take a wreath from the head.

   Crerate wreath ends with wire. When bonding the ends of the wreath, spend the wire under flower booths. You need to spray among themselves only stems of colors. When everything is done, cut the excess wire. Carefully postpone both tips of this wire deep into the woven stems.

Making a wreath of artificial flowers

Find a plastic or metal rim suitable for you. You will glue your colors to him.

Think about creating a ribbon winding on the rim. This will allow you to hide the original color of the rim and will provide better adhesion of glue. You can take a ribbon of any color, but green is better combined with flowers. If you do not have a green tape, then try to take a tape in tone instead of her tone. The tape can be fixed on the rim in two different methods that are listed below.

Choose artificial flowers for a wreath and torn their buds with stems. If the buds are not removed, take nippers for metal and cut the buds. Try to trim the flowers as close as possible to the bud.

If you need, also cut down the bottom of the bud. Sometimes, when tightening buds from the stem in the bottom of the bud, a small tail remains, which can interfere with the normal flower attachment to the rim. If you want the flower to be attached to the rim smoothly, then cut this tail.

A wreath of flowers on his head will be an excellent accessory to your summer along. And he loudly declares the world: "My mistress is aware of the trend!". Flower wreaths last autumn turned on the brightest stars of Russia and the world in their outfits. And they wore them even in winter at various events. Of course, those who continue to do with greek bandages were left. But their photos no longer appear on the pages of glossy magazines - their devices photographers have aimed at girls in wreaths. Do not believe? You can check. Viewing a lot of photos of celebrities who dressed a wreath of flowers on the head, you will have only one question: "Where to buy such a miracle?" But the fact of the matter is that all products that have arranged on the adorable stars and stars of all ranks - piece work. Made by designers and most often on request under a certain dress, such a wreath can cost cheaply.

Glowing wreath for yourself

You have one way out - create a masterpiece yourself. You to help - a master class called "How to make a wreath on the head of artificial colors." Something one, you will certainly want to make a couple more - so simple and fascinating will seem the process of manufacture. By making several wreaths, you will get one decoration to each of your image. And there who knows - maybe such a weaving will turn into an additional income, which will subsequently allow you to leave the dull job in the office.

How to make a wreath of artificial flowers

You will need: various artificial flowers - 20-25 pieces, leaves and berries, wire, scissors, pliers for its cutting and teip tape. Artificial flowers will find in any floral store or make it yourself. It is best to purchase both single buds and inflorescences.

Step-by-step instruction

One more option how to do

You can not fix the wire in the form of a circle, but to make on the ends of the loop. Punches of 5 centimeters will convey around the wire without connecting to each other. At the same time, leave the loops about 1 centimeter long. After fixing all the flowers, they attribute beautiful satin ribbons on them.

You will need

• - wire (1.0-1.2 mm);
• - White Teip-tape;
• - Two types of colors (small rose buds, dendrobium orchids);
• - Small greens Asparagus, Samshat, Ruskus;
• - White satin ribbon.

Instruction

Measure the girth of the head of the Operation for which the wreath is manufactured. If there is no such possibility, then make a wreath in an impected ring with ribbon ties. Such an addition would not only spoil, but, on the contrary, give a wreath even more charm.

Measure the segment of the wire, equal to scuffing the head plus 4-6 cm to connect the ends and obtain a closed ring. Cut another one or two such segments to make a ring of two or three wires folded together. The more massive and additional elements, the stronger should be the design of the wreath.

Tight wrap wire (until it is not yet bent) White Teip-ribbon. This slight sticky, used by florists in the manufacture of various accessories from, is sold in any floral. Compact the ends of the wire and secure them, turning one end around the other several times. The wreath circumference should be equal to the circle of the head.

In the case of the manufacture of an open wreath, measure the wire with a length equal to the tweaked or tripling scalp - depending on the intended mass of the accessory. Wire a Tape ribbon and fold it so that it is a segment that is equal to the standard head circumference (for size M - 57-58 cm, for size S - 55-56 cm).

At the tips of an open wreath a little break the flap of wires to get the loops for fastening ribbons. Schedule in these loops White satin ribbons 1 cm wide and tie them to a wreath frame.

To the ends of the wreath (or its back) attach a small bundle of decorative greenery. The beam stalks gently rewind the tape tape and secure a thin decorative wire for strength.

Cut close to the head white roses attach to a wreath, evenly distributing them across the circumference. For the front of the wreath, select Flowers with more opened petals, and closer to the back, use buds. Between roses, place 5-6 orchid colors.

Carefully remove the colors of the wire frame to be preserved by the sequence of flowers. Start attaching wreath elements to a carcass of teypel ribbon and wire, alternating flowers of two types and bunches of greenery. On the inside of the wreath, place only greenery sprigs. Roses place not in the same plane, but turn them slightly at different angles to the wire frame so that they look natural and the wreath was more voluminous.

Ukrainian wreath - a wonderful decoration for any age

Wreath In Ukraine, time impact was not only a national decoration. Until now, there is a belief that in the wreaths woven with girls personally, the Great and Mystical Power of Oberega was concluded. In addition to incredible natural beauty, imprisoned in such an unusual decoration, each element could do without words to tell about many ways: a married position, character, feelings of beauty-Ukrainians. Today, the woven wreath on the head is not only one of the symbols of Ukraine, but an incredibly stylish modern accessory.

History wreath

Residents of Ukraine from time immemorial did not just love, but also read and respected extremely, believing in their mysterious power to protect and bring good luck. The clothes were decorated with incredible floral patterns, the Ukrainian huts were signed, the towels and tablecloths were embroidered. The art of weaving a wreath of a girl was mastered at an early age. It was one of the ways not only to decorate her appearance, but also to show the ability, creativity, diligence and hard work. It would seem that a wreath on the head in Ukraine always existed. For now, it is not known who invented such a tradition and when, but everything will definitely agree with the fact that this art adequately live forever.

Ukrainian wreath can be seen in many paintings of the past years

Wreath weaving is a whole science that was transmitted from generation to generation. Traditional Ukrainian wreath consisted of 12 colors. Ukrainian girls, decorating themselves with a wreath, emphasized tenderness, femininity, youth and impossibility. It was believed that the wreath of flowers on his head possesses the magic force, which helped to learn pain, attract love and well-being, to protect the enviousness and even unclean forces from the evil.

Wreath and symbolism

Ukrainian wreaths on the head and their weaving was not just fun. Knowing the significance of a different flower, it was possible to read it, as if an open book. The choice of one or another flower depended on the age of beauty, status and even on what purpose the wreath was flew. Each flower carried its special symbolism:

• Immorter symbolized health. This is a modest look at the plant was considered a powerful faith from the ailments.
  Wreath of painted immortelle
• Chamomile flowers personified her virgus clean, blamefulness and loyalty.
  Chamomile can be part of the overall composition or the only element of the wreath
• Flowers of cornflower and loving could tell about sincere devotion and beauty of the soul.
  Vasilka are perfectly combined with daisies
• Barwinok is a symbol of the immortal soul and life.
  Barwinka is also one of the most famous Ukrainian symbol plants.
• Spring cherry and apple color was the personification of the love of the mother.
  
• The bunches of Valina - the main symbol of the girl's beauty.
  Kalina, as a symbol, often found in Ukrainian culture
• Hop is the personification of the mind, smelting.
• Yarrow - Chief Participant Wreath, Symbol of Non-Profility and Endurance.
• The ears of young wheat crowded to attract the crop, as the gifts of the generous earth and the symbol of good.
• Poppy color is an incredibly proud and bright flower, but he symbolized sadness and loss. The girls walked him in a wreath if someone had killed in the war with the enemy.
  Poppy wreath you can call mourning
• Sunflower flowers personified well-being, hard work and strength. The people believed that the sunflower was the most resistant and strong in the entire flower kingdom.
  Wreath of Sunflower colors
• Bright flowers of Malva, Rui and Peony could talk about the strength of faith, hope and love.
  Girlfriends Ukrainian women in bright wreaths
• White lily - a symbol of integrity. She woven into the Ukrainian wreath of those girls who went to the monastery as a symbol of the end of worldly life.
  

People believed that flowers are the gifts of God, and treat the true gift of nature with respect. The combination of certain colors could not tell about many words.

Value of colors in the Ukrainian wreath

More than 70 variations of weaving were known in Ukraine, among them ritual, ritual, magical and many other wreaths. By the way, the first wreath on the head of his daughter's mother's head, when she was performed for three years, it is sure to interrupt chamomile, as a symbol of clear mind and pure thoughts.

Little Ukrainian in her first wreath

Traditions

With a wreath of flowers on the head, a lot of ancient traditions are connected, some have been preserved today. For example, in ancient times, the girl handed a wreath, woven with her own hands, beloved as a sign of matchmaker and loyalty. Today, this tradition turned into the exchange of newlywed rings. Today, the bride throws a bouquet unmarried girlfriends at the wedding, and earlier it was a wreath who caresses him - he will be married.

Wreath played an important role in the guy and girl's relationship

Often, in the Ukrainian village, it was possible to see a wreath on the doors of the hut, it was believed that he was believed to defend the whole family from evil and troubles for a whole year, and also carried home health. In ancient times there were many variations of wreaths. One of the most popular was considered a wreath of devotion, it was the basis of Vasilek and Lubeys. By the way, a combination of flowers in such a wreath is a blue cornflower and a yellow lubber.

A wreath was given by one of the key roles for the holiday of Ivan Kupala

Ribbons in the Ukrainian wreath

In addition to colors, a Ukrainian wreath definitely decorated with multi-colored satin ribbons. Moreover, the choice of one or another color was not random, there were strict traditions. Girls from the Small years have learned the art of correctly climbing ribbons and understand what he means one or another.

Plus, the ribbons perfectly complement the appearance of a wreath

The first ribbon of the girl was walked in the middle of a wreath. It was necessarily a light brown, which personified fertile feed-ground. From both sides of the first yellow ribbons were woven - the personification of the sun and heat. They were crowded bright green, which was a symbol of maiden youth and beauty, and the blue ribbies were followed - the personification of the clean sky. It was believed that they gave the vital forces and health to the girl. After the blue, purple ribbons were crowded - the personification of wisdom, pink and crimson, symbolizing wealth and sincerity.

The value of ribbons in the Ukrainian wreath

There is a belief that ribbons should have been protected from the evil. The length of the ribbons in the wreath should not be arbitrary, and is measured strictly along the length of the maiden braid. If the girl walked the blue ribbon, then it meant that she was an orphan. People treated the girl with bread, in every way they have tried and tried to give.

In modern wreaths, ribbons play, rather, a decorative role

How to soar wreath?

Today, the art of weave the Ukrainian wreath with their own hands is gaining popularity again. Modern accessories in the form of a colorful wreath are incredibly popular not only in Ukraine. In order not to spend a lot of money on designer things, you can create an exclusive thing personally. This decoration is an excellent solution not only for thematic parties, weddings or national holidays. Colorful Ukrainian wreath can make everyday life of multicolored, joyful and bright. Wreaths can be soiled in different ways.

Previously, creating a wreath was a kind of ritual, and the process itself had a lot of nuances

Method number 1.

To make such an accessory with your own hands, you will need:

With the help of a wire, a frame is made for a wreath, you can weigh it in the form of a braid of three wire segments. Further, artificial flowers made of paper, phoamyran or tissues are fixed on the frame, gluing, and then winding with ribbons. In the summer, you can use live flowers, so the wreath will look in a special way and gently.

We make a wreath based on wire

Method number 2.

Original and easy way to create a bright accessory from girlfriend. We need:

• ordinary plastic bottle; Make such a wreath under the power of each

  The base (hoop) of a symmetric shape is cut out of a plastic bottle, gently squeezed with a green cloth. A rubber band around the head of the head is sewn to two sides of the base. On the front side of the foundation, flowers are glued in random order, you can add beads, beads. The result is a refined and original accessory.

  Ukrainian wreath based on gum

  Ukrainian

  Making the hoop wreath

  Today, many, putting on a popular and unusually bright accessory, do not even think that it is not just a decoration, but a real chaff. Making a wreath of colors on the head, you can not only emphasize tenderness, femininity and elegance. Wreath is a symbol of love, tribute to traditions and valuable heritage of the Slavic people.

At the fashion shows of the recent seasons, you can often see the demonstration of dresses and sundresses in combination with wreaths that decorate the heads of the models. The dimensions of the compositions are the most diverse, as well as the color solutions. The trend on this accessory immediately appreciated the French representatives. Moreover, age does not matter. Everyone can pick up the perfect model, profitable emphasising natural beauty.

Who and for what cases will suit

Use a wreath for hair decoration can be almost all women. Another question in choosing a floristic composition and size of flowers. Teenagers and girls can safely try on themselves any form. The main criterion is the combination with the outfit. Women will suit the restrained compositions of small-sized buds. The color scheme should consist mainly of pastel and light tones.

Wear an accessory appropriate even in everyday life. It is a clear case, you can hardly wear such an accessory. But for meetings with friends, traveling to the weekend such a decor is quite suitable.

The main purpose of the wreath is considered solemn and holidays. In recent years, there has been popularity of the use of the accessory in the image of the bride. Little girls and adult ladies look equally well with gentle little buds on her head. It emphasizes femininity, gives the appearance of gentle notes and charm.

Folk festivities and holidays can also be a reason to transformed with the decoration of the hairstyle wreath. The current youth loves to celebrate Ivan Kupala. Girls with a floral composition on the head look mysterious and charming. This holiday is not required without a mandatory attribute - a wreath, woven of living colors.

When using a flower accessory, it is important to remember that it is relevant in the spring-summer period. Although some fashion guards manage to combine it with fur coats and high boots. To adapt the accessory to the time of the year can be using decorative elements that correspond to the flowering pore. Autumn decorations look beautiful and appropriate from yellowed leaves.

Wedding hairstyle can be supplemented with gentle wreaths from beads or colors
Wear an accessory appropriate even in everyday life
Little girls and adult ladies equally look good with gentle little buds on her head
Cute little ladies can wear a wreath on a photo session

How to make it yourself

For manufacture, the following materials will be required:

• wire;
• flowers on branches or individual buds;
• ribbons.

So that the base is firmly fixed on the head, you can use the rim. To complement the flowers are recommended by beads and different greens. So the composition will look more beautiful and richer.

From the tools you will need only scissors. For the convenience of fastening the flowers, stylists advise to apply a glue gun. The hot method of fixation will quickly and reliably secure on the basis of the desired fragment. It will save a lot of time on drying the surface.

Elements for composition are used from different materials. On celebrations and state events, hair is decorated with a rim from living inflorescences. But more often used plastic and paper. Very spectacular composition of the composition made of fabric. The skill is honed for years, as a result of which buds are obtained, which immediately distinguish from living colors will not succeed.

From artificial flowers

Step-by-step instruction:

1. Measure the girth of the head to create a wire frame. If there is no possibility to remove the measure, then a wire rim with an impected ends should be made to which the ribbons are fixed. With the tying on the head of the wreath, you can wear different sizes. In the case of the use of measure, it is necessary to cut 3-4 wire ponds, a length of the head of the head plus 4-5 cm for fixing the ring. Twist the basis of them, not closure ends.
2. Take the sprigs of artificial colors and disassemble them on separate boutons and leaves. Short sprigs are suitable for the composition. Flowers need to cut close to the bottom, so that the stalks do not interfere with the mount.
3. Pre-draw the workpiece from buds and leaves, settling on the table. Larger fragments are placed in the center, to the occipital part - small. Flowers should cross in tone and sizes, and the total composition is supplemented with greens of leaves and twigs.
4. Felt cut the circles, Diameter less than flowering buds.
5. Glue the felt blank to each fragment So that the center remains a free strip of 0.5-0.7 mm wide.
6. Alternately drive all items, stretching the wire base into the empty space in the center of the felt.
7. Distribute and adjust the composition.
8. Twist the ends of the wire, Wrapped with each other several times.
9. Cover the place of connection of the rim with flowers.

From living flowers

Step-by-step manufacture of wreath:

1. Make a wire frame. To do this, you need to cut 3-4 pntures, the length of which will be equal to the size of the head of the head plus 3-4 cm on the fixation of the ends.
2. Prepare plants by cutting their stems at 10-14 cm. In order for the flowers not to start quickly, they should be treated with floristic sprays. So the wreath will keep a presentable look for a long time.
3. The resulting ring is wrapped with a floral ribbon 4-5 cm, after which it alternately lay the fragments of the wreath. Each stalk is tightly fixed with a ribbon, making 3-4 turns. Place the items need to be more densely to each other. Elements will serve the main flowers, field herbs, another greens. As a supplement, you can use beads and pebbles planted on the pieces of wire. In combination with alive colors, the decor will look exquisitely.
4. The stalks of the last elements are hiding Under the fixed plants and are tightly fixed with ribbon.

Wreaths from living inflorescences can be mad without creating a frame. Cut the stems in this case is not necessary. Weave to start with the formation of a beam of 3-5 stems. Each new fragment turns around the long stems of the initial beam by two turns (up to the inflorescence and after it).

The end is connected to the beam and closes into the ring using a floral ribbon. To give the accessory of strength to the stems of the initial beam, put the ribbon from the atlas. It is subsequently use to connect the composition.

From autumn leaves

It looks very beautifully a wreath of autumn leaves. The most popular is Klyon. Its leaves are yellowing faster than the other trees, and the structure is durable, not losing the original type for a long time.

Step-by-step instruction:

1. On the prepared from the wire, the rim mounting 4-6 leaves at the same time. Fixation is performed using a floral tape.
2. After 3-4 beams of maple leaves, insert rowabine. We will not know the reminder of the summer. To do this, you can insert green leaflets every 5-7 rows.
3. Stands of the last fragments need to hide Under fixed leaves, but cut off.

From paper

Paper flowers are very gentle and fragile. When wearing can lose the form, so the masters recommend to fix flower arrangements on a solid foundation. The usual hoop is best suited for this. It is better if its foundation is wide, then the accessory will be massive.

Instruction:

1. Stay on the table a composition of paper buds and leaves. You can add plastic greenery and beads fixed on the wire. The massive part is located in the middle, and to place small elements to the edges.
2. Alternately fasten fragments to the base of the hoopUsing hot glue or pva.
3. Seal the composition of greens And another decor.
4. Parts of the hoop concerning the ears You do not need to accumulate with floral elements.

From tapes

To create a wreath you will need to prepare the elements: Flowers 4-5 species, greens, stamens. All of them are performed from satin and organza ribbons. If, on the tonality of colors everything is clear (for a beautiful composition, they are performed from various bright colors), then the leaves are cut into the creation of the composition of the composition of several shades of the green ribbon. To add air product, you need to use billets from organza.

The form of greenery should repeat the outline of the leaves of several plants. For example: Poplar, Oak, Clean. All edges of the elements made from the tapes must be melted to prevent the strain of the threads. To this end, you can use a lighter. Of the colors are often selected: poppies, chamomile, cornflowers, roses, chrysanthemums, asters. They are well combined with each other or in addition to other inflorescences.

Step-by-step instruction:

1. Wave up the rim with a green ribbon method "Snake". Fix the needle and thread ends of weaving. It will be the basis.
2. Stick leafs along the contour of the rim on both sides. Stop the elements of the venge, applying different types of greenery. There should be a volumetric basis.
3. Next, alternately consolidate on glue flowers.
4. Lastly, a compaction of the composition with organza leaves is sealing. They need to be recorded at once 3-5 pieces. Then the wreath will be great.
5. To the edges of the rim to sew a gum 10-15 cm (Depending on the circle of the head). It should be decorated with green organs.
6. To sew a few freely saving tapes of 30-40 cm. It will look beautiful if you use satin strips of different thicknesses (1 and 2 cm). Their colors must elaborate with the colors used in the composition. On the edges of the ribbon to perform a beautiful triangular cutting.

• For long events, it is worth carefully using accessories from living inflorescences. They quickly lose sight and by the middle of the celebration will completely lose a presentable look if they pre-hold them in the refrigerator. It will help to prevent a quick fading a special spray bought in a floral store.
• If the active rest is provided, the reliability of the wreath attachment should be taken into account. It will help to better fix the rim on the head of the tape tied on the back of the head.
• A bright wreath of large colors should not be complemented with catching makeup. It turns out an overload image.
• The flower accessory on the loose and slightly curled hair looks spectacularly. The appearance acquires the traits of tenderness, romanticism and freshness.
• You can make a wreath from several twigs of artificial colors. To begin with, the branches on separate fragments should be disassembled. After that collect the composition by gluing the elements on the hoop.
• On the solemn events and weddings it is recommended to use accessories Of the small flowers of pastel tones. Thin satin ribbons will add conformity to the appointment.
• Before making a wreath for a bride from the living colors, you should consult with a florist. The specialist will prompt, from which plants it is better to make a decoration. Fast flower rim damage can spoil the holiday.
• The longer straight, the larger the elements of the composition in the wreath.
• The accessory must be comfortable to put on the head. Do not build too bulky rims. Wearing them uncomfortable, and in the photo the face will be constantly lost in buds and leaves.
• If the outfit of the bride suggests the addition to the wreath, Buds from the rim must cross the bouquet.